Music makes the difference.

Pro Audio Mixers

Our most rugged, lightweight powered mixers ever, with low-noise microphone preamps.

XR® 8600D
The XR® 8600D features eight ultra-low-noise mic preamps and ten line inputs, with 16 built-in DSP effects, monitor send and effects send on each channel, 7-band graphic EQ with patented FLS® Feedback Locating System and two 600-watt power amps that can run in parallel in Dual Main mode-making the full 1,200 watts available to the main output-or used independently in Main/Monitor mode.

XR® 8300
The XR 8300 has all of the features of the XR 8600D, with dual power amps that can be run in Dual Main mode for 600 watts or Main/Monitor mode for 300 watts each. Includes eight ultralow- noise mic preamps and ten line inputs, with 16 built-in DSP effects, monitor send and effects send on each channel, 7-band graphic EQ with patented FLS® Feedback Locating System.

- 8 improved, low-noise mic preamps
  • - 10 line inputs
  • - 48V phantom power
  • - 3-band EQ, monitor send and effects send on each channel
  • - 25 dB pad on channels 1-6
  • - Signal and Clip indicator on each channel
  • - Dual Main or Main/Mon power amp mode switch
  • - Dedicated 7-band graphic for mains and monitors with FLS®
  • - DDT™ speaker protection
  • - DSP based effects with parameter control
  • - Channel mute switch
  • - Rugged plastic case
  • - 2x300 watts per channel at 4 ohms
    • PVI4B
     4 balanced XLR mic inputs
  • - Tape/CD inputs
  • - 10 total inputs
  • - Reverb control on each channel
  • - Line Out for connection to external amplifiers
  • - Record Out for taping
  • - RF interference protection on all inputs.
  • - 100 watts into 4 ohm (2 x 8 ohm) speakers

    • PVI8B
    - 8 balanced XLR microphone inputs
    - Tape/CD inputs

  • - Reverb level control on each channel
  • - Line Out for connection to external amplifiers
  • - Return input for connection of external effects processors
  • - Record Out for taping
  • - RF interference protection on all inputs.
  • - 150 watts into 4-ohm (2 x 8 ohm) speakers

    • Pro features made affordable, all in a heavy-gauge steel chassis.

    Multi-use PV® Series mixers feature discrete, ultra-low-noise microphone preamps that are essential for live-sound reproduction and studio recording, plus a host of additional features such as effects and monitor sends on each channel, zero-latency record monitoring capability and 48 volts phantom power.

    PV6
    - Channels 3 and 5 with stereo line inputs
  • - 3-band EQ on channels 1-2
  • - LED clip, signal
  • - 1 effects send with stereo output
  • - 1 stereo effects returns
  • - Control room output
  • - Global 48 volt phantom power, tape to control room and tape to mix assignments
  • - Stereo Output 1/4 inch balanced connectors
  • - Rugged console design
  • - Reaper Software included
  • - 4 RQ™ (reference-quality) low noise microphone inputs

    •  

     

    PV8
    - channels 5/6 and 7/8 with dual switchable stereo line inputs
  • - 3-band EQ on all channels
  • - LED clip, signal, 1 pre-fader monitor send
  • - 1 post-fader effects send with stereo output
  • - Control room output
  • - Global 48 volt phantom power, tape to control room and tape to mix assignments
  • - Stereo output 1/4 inch balanced connectors
  • - Rugged console design
  • - Reaper Software included
  • - 4 RQ™ (reference-quality) low noise microphone inputs
    • PV10
    - 6 RQ™ (reference-quality) low noise microphone inputs with insert points
  • - Channels 7/8 and 9/10 w/ dual switchable stereo line inputs
  • - 3-band EQ on all channels
  • - LED clip, signal, mute indication
  • - 1 pre-fader monitor send
  • - 1 post-fader effects send
  • - Precision 60 mm faders on input channels and stereo master outputs
  • - Control room output
  • - Global 48 volt phantom power, tape to control room and tape to mix assignments
  • - Stereo outputs with 1/4" unbalanced and XLR balanced connectors
  • - Rugged console design
  • - Universal switching power supply
  • - Built-in DSP effects processor
    • PV14
     10 RQ™ (reference-quality) low noise microphone inputs with insert points
  • - Channels 11/12 and 13/14 with dual switchable stereo line inputs
  • - 3-band EQ on all channels
  • - LED clip, signal, mute indication
  • - One pre-fader monitor send
  • - One post-fader effects send
  • - Precision 60 mm faders on input channels and stereo master outputs
  • - Control room output
  • - Global 48 volt phantom power, tape to control room and tape to mix assignments
  • - Stereo outputs with 1/4" unbalanced and XLR balanced connectors
  • - Rugged console design
  • - Universal switching power supply
  • - Built-in DSP effects processor
    • Content copyright . King Music Co. All rights reserved.
    Web Hosting